|












|
 |
|
|
Welcome to Minelabowners.com
|
| |
Mounting
Options
I am not the originator of this but it helps a big weakness. The SOV.
does not balance well. ESp. with a meter. The bag that comes with
it is nice but never I liked hipmounts. This trick works! Move the
box to the rear part of the handle. Remove the existing mounting wedge
from the rod by drilling out the two pop rivits with a 1/8" drill
bit. Move the arm cup assembly to its most reaward hole and put the
bolt through. Turn the assy. upside down. Take the removed mounting
wedge and slip it onto the box just like you would if it were mounted
on the rod. Now position the box (upside down also) on the rod just
in front of the arm cup assy. with the coil connector facing the coil.
Make sure the knobs just clear the arm cup. While supporting the box
and wedge make sure its straight and the outline the wedge position
on the rod with a pencil. Now remove the wedge from the box. Place
it inside the outline on the rod. While holding the bracket tightly
drill 1/8" holes using the wedges holes as a guide. Pop rivit
with two 1/8" rivits. Mount box and attach cable. Velcro behind
the meter with a slight slack loop. With the rod fully extended the
whole unit will now balance on your finger just ahead of the meter.
When you swing it the first time you will swear it actually weighs
a lot less. I dont know how this might be viewed by MINELABs warr.
So no matter how good it feels dont ever do this. I never would.
This Tip Compliments PUBLIUS
|
|
|
|
|
|
|
|

Detector Dicks Detecting
Diary. Articles Needed! Click here
Require field tests and other info. This is your site...you have the
info...send it and share it Click
here
.
|

This is where we can
put some news and other stuff that might be of interest to your clients.
This is where we can put some news and other stuff that might be of
interest to your clients. |
|