Field 2 is more sensitive as biased to the higher frequencies but at the sacrifice of depth.
I use what's suited to my sites and signals I'm expecting.
Example was last week using tried using Field...
L&G property Ltd.
https://find-and-update.company-information.service.gov.uk/company/02091897/officers
you could try one of these 5. interesting to see 31 resigned from 36
Usual trade of between sensitivity, depth and targets with the frequency shift.
Same with any detector and the Equinox is very sensitive in both modes.
The stuff I find in Field 1 is tiny and why...
Main thing is the U3A2 spec for the cards.
Most makes should have same performance if this standard.
When I went to 4k recording on my main camera I had to update the cards as well.
Least you got in the fields.
One thing I find is the GP can be temperamental with the cards you use.
I use SanDisk U3A2 cards 90Mb/s write and also format them regularly.
Another tip is to fully...
went out today for a couple of hours. Having charged up the battery I got onto the field to see my battery indicator go down to one bar. Thankfully it stayed at one bar for a good two hours. Not sure...
Good morning
Hi Guys its Mal,
Well our Mind Charity run Land End to John O’Groats run event is only two weeks away and we are furiously getting everything in place and Ians training is going...
You've answered your own question and you can raise it to whatever levels your conditions allow but the you need to keep it stable for best performance.
Many users just whack it up and then wonder...
Originally the design was max at 25 but for UK the boosting remained at the request of the testers.
This was done before launch and when I was using the prototype I was amazed at the difference this...
Having the sensitivity over 20 is part of the issue as thats the design maximum at 20.
When you go above its boosting the signals including the spurious ones. Ok if your Equinox is stable but run...
why would I roll back? it's an upgrade. perhaps your problem is more to do with ground balancing than the v3. why not do as recommended and leave the ground balance on 0?
Find latest posts
