goldrush101
Newbie

Yep fine as long as ok with your landowner :)

Welcome back and hope you are fully recovered :)

Thanks for the comment :Thumbs-Up:

Thanks guys :)

Welcome back to this great hobby from across the Pond :hi:

Field 2 is more sensitive as biased to the higher frequencies but at the sacrifice of depth. I use what's suited to my sites and signals I'm expecting. Example was last week using tried using Field...

Usual trade of between sensitivity, depth and targets with the frequency shift. Same with any detector and the Equinox is very sensitive in both modes. The stuff I find in Field 1 is tiny and why...

Welcome back to the hobby from across the Pond :hi:

Main thing is the U3A2 spec for the cards. Most makes should have same performance if this standard. When I went to 4k recording on my main camera I had to update the cards as well.

Least you got in the fields. One thing I find is the GP can be temperamental with the cards you use. I use SanDisk U3A2 cards 90Mb/s write and also format them regularly. Another tip is to fully...

Welcome to this great Forum:hi:

You've answered your own question and you can raise it to whatever levels your conditions allow but the you need to keep it stable for best performance. Many users just whack it up and then wonder...

Originally the design was max at 25 but for UK the boosting remained at the request of the testers. This was done before launch and when I was using the prototype I was amazed at the difference this...

Having the sensitivity over 20 is part of the issue as thats the design maximum at 20. When you go above its boosting the signals including the spurious ones. Ok if your Equinox is stable but run...

Not as good looking :) Nig gets confused as to what's he trying to grip :)

So how do you do the coil jack and spring clip. :) Get a grip man lol lol

What you undoing as only a plastic bolt and nut or is it something else :)

Why as only take a minute to change over even in the fields :)

I just give mine a quick rinse, bag them up then take them now to the local Post Office and no issues. I used to take them to my local Nat West and purposefully make sure I had the snotty teller...

You mean really very cheap my little closet “Yorkie” :)

Thanks Coinball :)

They are on GP9 now and some deals should be had for a GP7 Hero black which is one of the ones I use in association with a Panasonic FT5 all weather camera.

:) you didn't read the credits in the vid :) I use two cameras one GoPro Hero 7 black on a chest mount and a Panasonic FT5 on a Gorilla pod. As for the holes just a keen edge on a £6 s/s border...

Welcome to this great Forum from across the Pond :hi:

Have you plugged in your CTX yet? Normally that happens first time till you connect your detector. Also register with Minelab to activate the mapping function.

Got another next day :)